Ultra Pack UVK+.
Reliable in high humidity and heat
Ultra Pack UVK+ was developed especially for direct container and packaging printing such as bottles, cans, cups, and cartridges. It can be used on machines at a printing speed of up to 7,000 bottles per hour. Especially insensitive towards to climatic conditions such as heat and humidity.
- One-component ink with excellent water and vapour resistance
- High degree of gloss, no risk of heat-induced dullness
- Very fast UV curing enables fast printing speeds
- Very good mechanical, chemical, and filler resistance
Substrates:
- Polyethylene (PE), pre-treated
- Polyproylen (PP), treated
Industry solution for:
- Bottles
- Cans
- Cups
- Cartridges
Highlights:
Excellent water and vapour resistance (singlecomponent!)
- Utmost process and quality safety
High degree of gloss
- No risk of heat-induced dullness
High reactivity, fast curing
- Allows high printing speeds
Very good mechanical, chemical, and filler resistance
- Extremely durable ink film
Perfectly adjusted rheology
- Easy handling
Brilliant colour shade
Available in these sizes / volumes
High Opaque Shades
170
Opaque White
171
Opaque White
172
Opaque White, silicone-free
180
Opaque Black
Basic Shades
922
Light Yellow
924
Medium Yellow
926
Orange
932
Scarlet Red
934
Carmine Red
936
Magenta
950
Violet
952
Ultramarine Blue
956
Brilliant Blue
960
Blue Green
962
Grass Green
970
White
980
Black
Further Products
904
Special Binder
Opaque White 170, 1 kg
37410057170
37410057170
Opaque White 171, 1 kg
37410057171
37410057171
Opaque White, silicone-free 172, 1 kg
37410057172
37410057172
Opaque Black 180, 1 kg
37410057180
37410057180
Light Yellow 922, 1 kg
37410057922
37410057922
Medium Yellow 924, 1 kg
37410057924
37410057924
Orange 926, 1 kg
37410057926
37410057926
Scarlet Red 932, 1 kg
37410057932
37410057932
Carmine Red 934, 1 kg
37410057934
37410057934
Magenta 936, 1 kg
37410057936
37410057936
Violet 950, 1 kg
37410057950
37410057950
Ultramarine Blue 952, 1 kg
37410057952
37410057952
Brilliant Blue 956, 1 kg
37410057956
37410057956
Blue Green 960, 1 kg
37410057960
37410057960
Grass Green 962, 1 kg
37410057962
37410057962
White 970, 1 kg
37410057970
37410057970
Black 980, 1 kg
37410057980
37410057980
Special Binder 904, 1 kg
37410057904
37410057904
High Opaque Shades
181
Opaque Black
Opaque Black 181, 5 kg
37410058181
37410058181
- High Opaque Shades170
Opaque White
171Opaque White
172Opaque White, silicone-free
180Opaque Black
Basic Shades922Light Yellow
924Medium Yellow
926Orange
932Scarlet Red
934Carmine Red
936Magenta
950Violet
952Ultramarine Blue
956Brilliant Blue
960Blue Green
962Grass Green
970White
980Black
Further Products904Special Binder
Opaque White 170, 1 kg
37410057170Opaque White 171, 1 kg
37410057171Opaque White, silicone-free 172, 1 kg
37410057172Opaque Black 180, 1 kg
37410057180Light Yellow 922, 1 kg
37410057922Medium Yellow 924, 1 kg
37410057924Orange 926, 1 kg
37410057926Scarlet Red 932, 1 kg
37410057932Carmine Red 934, 1 kg
37410057934Magenta 936, 1 kg
37410057936Violet 950, 1 kg
37410057950Ultramarine Blue 952, 1 kg
37410057952Brilliant Blue 956, 1 kg
37410057956Blue Green 960, 1 kg
37410057960Grass Green 962, 1 kg
37410057962White 970, 1 kg
37410057970Black 980, 1 kg
37410057980Special Binder 904, 1 kg
37410057904 - High Opaque Shades181
Opaque Black
Opaque Black 181, 5 kg
37410058181
Properties:
- UV-curable screen printing ink for pre-treated polyethylene and polypropylene
- Very fast curing, high degree of gloss, water and steam resistant, high filler resistance, thixotropic adjustment
Substrates:
- Polyethylene (PE), pre-treated
- Polyproylen (PP), treated
Auxiliaries:
| UVV3 | Thinner | 1 - 10 % |
| H3 | Hardener | 2 - 4 % |
| UV-B1 | UV Accelerator | 1 - 2 % |
| STM | Thickening Agent | 0.5 - 2 % |
| UV-VM | Levelling Agent | 0.5 - 1.5 % |
| UV-SA1 | Surface Additive | 0.4 - 0.8 % |
| UV-TA1 | Thickening Agent | 0.1 - 0.5 % |
| UR3 | Cleaner (flp. 42°C) | |
| UR4 | Cleaner (flp. 52°C) | |
| UR5 | Cleaner (flp. 72°C) |
Ink adjustment:
In regard of viscosity and rheology, all Ultra Pack UVK+ colour shades are press-ready and brilliant at a best possible opacity and high gloss. All UVK+ shades can be embossed with suitable hot stamping foils.
Drying:
Ultra Pack UVK+ is a very fast curing UV ink.
A UV-curing unit (medium-pressure mercury lamp) of 120 to 200 W/cm is therefore necessary.
The curing speed of the ink is generally dependant upon the kind of UV-curing unit (reflectors), number, age, and power of the UV-lamps, the printed ink film thickness, colour shade, substrate in use, as well as the printing speed.
Adhesion of the ink is usually controlled by a tape test after the printed bottles have cooled down to room temperature. Ultra Pack UVK+ is a post-curing UV ink which will achieve its best adhesion and resistance after 24 hours.
As with all UV-curable printing inks, the presence of residual monomers and photoinitiators' decomposition products cannot be completely ruled out even after sufficient curing. If these traces are relevant for the application, this must be taken into account in individual cases, as this depends on the actual printing and curing conditions.
A UV-curing unit (medium-pressure mercury lamp) of 120 to 200 W/cm is therefore necessary.
The curing speed of the ink is generally dependant upon the kind of UV-curing unit (reflectors), number, age, and power of the UV-lamps, the printed ink film thickness, colour shade, substrate in use, as well as the printing speed.
Adhesion of the ink is usually controlled by a tape test after the printed bottles have cooled down to room temperature. Ultra Pack UVK+ is a post-curing UV ink which will achieve its best adhesion and resistance after 24 hours.
As with all UV-curable printing inks, the presence of residual monomers and photoinitiators' decomposition products cannot be completely ruled out even after sufficient curing. If these traces are relevant for the application, this must be taken into account in individual cases, as this depends on the actual printing and curing conditions.
Printing parameters:
Selection of the fabric depends on the printing conditions, the required curing speed and productivity, as well as the requested opacity. Generally, fabrics of 140-31 to 180-31 can be used. A uniform screen tension (>16 N) of all fabrics used is further important. All commercially available capillary films (15-20 µm) or solvent resistant photo emulsions and combined stencils can be used for UV-inks.
- Polyethylene (PE), pre-treated
- Polyproylen (PP), treated
- Bottles
- Cans
- Cups
- Cartridges
- Utmost process and quality safety
- No risk of heat-induced dullness
- Allows high printing speeds
- Extremely durable ink film
- Easy handling
Substrates:
Industry solution for:
Highlights:
Excellent water and vapour resistance (singlecomponent!)High degree of glossHigh reactivity, fast curingVery good mechanical, chemical, and filler resistancePerfectly adjusted rheologyBrilliant colour shade- High Opaque Shades170
Opaque White
171Opaque White
172Opaque White, silicone-free
180Opaque Black
Basic Shades922Light Yellow
924Medium Yellow
926Orange
932Scarlet Red
934Carmine Red
936Magenta
950Violet
952Ultramarine Blue
956Brilliant Blue
960Blue Green
962Grass Green
970White
980Black
Further Products904Special Binder
Opaque White 170, 1 kg
37410057170Opaque White 171, 1 kg
37410057171Opaque White, silicone-free 172, 1 kg
37410057172Opaque Black 180, 1 kg
37410057180Light Yellow 922, 1 kg
37410057922Medium Yellow 924, 1 kg
37410057924Orange 926, 1 kg
37410057926Scarlet Red 932, 1 kg
37410057932Carmine Red 934, 1 kg
37410057934Magenta 936, 1 kg
37410057936Violet 950, 1 kg
37410057950Ultramarine Blue 952, 1 kg
37410057952Brilliant Blue 956, 1 kg
37410057956Blue Green 960, 1 kg
37410057960Grass Green 962, 1 kg
37410057962White 970, 1 kg
37410057970Black 980, 1 kg
37410057980Special Binder 904, 1 kg
37410057904 - High Opaque Shades181
Opaque Black
Opaque Black 181, 5 kg
37410058181
Available in these sizes / volumesHigh Opaque Shades170Opaque White
171Opaque White
172Opaque White, silicone-free
180Opaque Black
Basic Shades922Light Yellow
924Medium Yellow
926Orange
932Scarlet Red
934Carmine Red
936Magenta
950Violet
952Ultramarine Blue
956Brilliant Blue
960Blue Green
962Grass Green
970White
980Black
Further Products904Special Binder
Opaque White 170, 1 kg
37410057170Opaque White 171, 1 kg
37410057171Opaque White, silicone-free 172, 1 kg
37410057172Opaque Black 180, 1 kg
37410057180Light Yellow 922, 1 kg
37410057922Medium Yellow 924, 1 kg
37410057924Orange 926, 1 kg
37410057926Scarlet Red 932, 1 kg
37410057932Carmine Red 934, 1 kg
37410057934Magenta 936, 1 kg
37410057936Violet 950, 1 kg
37410057950Ultramarine Blue 952, 1 kg
37410057952Brilliant Blue 956, 1 kg
37410057956Blue Green 960, 1 kg
37410057960Grass Green 962, 1 kg
37410057962White 970, 1 kg
37410057970Black 980, 1 kg
37410057980Special Binder 904, 1 kg
37410057904High Opaque Shades181Opaque Black
Opaque Black 181, 5 kg
37410058181- UV-curable screen printing ink for pre-treated polyethylene and polypropylene
- Very fast curing, high degree of gloss, water and steam resistant, high filler resistance, thixotropic adjustment
- Polyethylene (PE), pre-treated
- Polyproylen (PP), treated
Properties:
Substrates:
Auxiliaries:
UVV3 Thinner 1 - 10 % H3 Hardener 2 - 4 % UV-B1 UV Accelerator 1 - 2 % STM Thickening Agent 0.5 - 2 % UV-VM Levelling Agent 0.5 - 1.5 % UV-SA1 Surface Additive 0.4 - 0.8 % UV-TA1 Thickening Agent 0.1 - 0.5 % UR3 Cleaner (flp. 42°C) UR4 Cleaner (flp. 52°C) UR5 Cleaner (flp. 72°C) Ink adjustment:
In regard of viscosity and rheology, all Ultra Pack UVK+ colour shades are press-ready and brilliant at a best possible opacity and high gloss. All UVK+ shades can be embossed with suitable hot stamping foils.Drying:
Ultra Pack UVK+ is a very fast curing UV ink.
A UV-curing unit (medium-pressure mercury lamp) of 120 to 200 W/cm is therefore necessary.
The curing speed of the ink is generally dependant upon the kind of UV-curing unit (reflectors), number, age, and power of the UV-lamps, the printed ink film thickness, colour shade, substrate in use, as well as the printing speed.
Adhesion of the ink is usually controlled by a tape test after the printed bottles have cooled down to room temperature. Ultra Pack UVK+ is a post-curing UV ink which will achieve its best adhesion and resistance after 24 hours.
As with all UV-curable printing inks, the presence of residual monomers and photoinitiators' decomposition products cannot be completely ruled out even after sufficient curing. If these traces are relevant for the application, this must be taken into account in individual cases, as this depends on the actual printing and curing conditions.Printing parameters:
Selection of the fabric depends on the printing conditions, the required curing speed and productivity, as well as the requested opacity. Generally, fabrics of 140-31 to 180-31 can be used. A uniform screen tension (>16 N) of all fabrics used is further important. All commercially available capillary films (15-20 µm) or solvent resistant photo emulsions and combined stencils can be used for UV-inks.
CONTACT US
Marabu printing inks are used all over the world - with 16 subsidiaries worldwide and distribution partners in more than 80 countries. Find your contact here.