Ultra Pack LEDC.
Energy efficient LED inks for plastics
The screen printing ink Ultra Pack LEDC is especially suitable for direct printing onto
plastic packaging and containers. It is LED-curing and convinces with its adhesion, opacity, and gloss level.
- No thermal stress for the substrate
- No ventilation necessary and no pre-heating necessary, for high outputs
- Highest energy efficiency with LED-curing
- Best print results with strong adhesion, opacity, gloss and reactivity
Substrates:
- Polyethylene (PE), pre-treated
- Polyproylen (PP), treated
- Polyester (PETG, PETA)
- PVC, rigid
- Polycarbonate (PC)
- Polystyrene (PS)
Industry solution for:
- Packaging printing
- Flatbed label printing
Highlights:
LED does not emit infrared radiation, and thus no heat
- No thermal stress for the substrate
Only UV-A radiation, causing no ozone emissions
- No ventilation necessary
UV-LED lamps are immediately ready for use
- No pre-heating necessary, for high outputs
Long lifetime of the UV-LED lamps compared to conventional UV lamps
UV-LED formulation allows conventional UV curing or LED curing without additional post curing
- Flexible printing process without conventional post curing
LED curing at an intensity peak of 380 - 395 nm
- Highest energy efficiency
Depending upon the printing speed, UV-LED lamps with a power range > 4 W/cm2 can be used
Available in these sizes / volumes
High Opaque Shades
122
High Opaque Light Yellow
132
High Opaque Scarlet Red
152
High Opaque Ultramarine Blue
162
High Opaque Grass Green
170
Opaque White
180
Opaque Black
188
Deep Black
Basic Shades
922
Light Yellow
924
Medium Yellow
926
Orange
932
Scarlet Red
934
Carmine Red
936
Magenta
950
Violet
952
Ultramarine Blue
956
Brilliant Blue
960
Blue Green
962
Grass Green
970
White
980
Black
Further Products
904
Special Binder
Special Products "Inline Foiling Tubes"
LEDC-IFT
Varnish "Inline Foiling Tubes"
171
Opaque White, silicone-free
High Opaque Light Yellow 122, 1 kg
37510057122
37510057122
High Opaque Scarlet Red 132, 1 kg
37510057132
37510057132
High Opaque Ultramarine Blue 152, 1 kg
37510057152
37510057152
High Opaque Grass Green 162, 1 kg
37510057162
37510057162
Opaque White 170, 1 kg
37510057170
37510057170
Opaque Black 180, 1 kg
37510057180
37510057180
Deep Black 188, 1 kg
37510057188
37510057188
Light Yellow 922, 1 kg
37510057922
37510057922
Medium Yellow 924, 1 kg
37510057924
37510057924
Orange 926, 1 kg
37510057926
37510057926
Scarlet Red 932, 1 kg
37510057932
37510057932
Carmine Red 934, 1 kg
37510057934
37510057934
Magenta 936, 1 kg
37510057936
37510057936
Violet 950, 1 kg
37510057950
37510057950
Ultramarine Blue 952, 1 kg
37510057952
37510057952
Brilliant Blue 956, 1 kg
37510057956
37510057956
Blue Green 960, 1 kg
37510057960
37510057960
Grass Green 962, 1 kg
37510057962
37510057962
White 970, 1 kg
37510057970
37510057970
Black 980, 1 kg
37510057980
37510057980
Special Binder 904, 1 kg
37510057904
37510057904
Varnish "Inline Foiling Tubes" LEDC-IFT, 1 kg
37510057001
37510057001
Opaque White, silicone-free 171, 1 kg
37510057171
37510057171
- High Opaque Shades122
High Opaque Light Yellow
132High Opaque Scarlet Red
152High Opaque Ultramarine Blue
162High Opaque Grass Green
170Opaque White
180Opaque Black
188Deep Black
Basic Shades922Light Yellow
924Medium Yellow
926Orange
932Scarlet Red
934Carmine Red
936Magenta
950Violet
952Ultramarine Blue
956Brilliant Blue
960Blue Green
962Grass Green
970White
980Black
Further Products904Special Binder
Special Products "Inline Foiling Tubes"LEDC-IFTVarnish "Inline Foiling Tubes"
171Opaque White, silicone-free
High Opaque Light Yellow 122, 1 kg
37510057122High Opaque Scarlet Red 132, 1 kg
37510057132High Opaque Ultramarine Blue 152, 1 kg
37510057152High Opaque Grass Green 162, 1 kg
37510057162Opaque White 170, 1 kg
37510057170Opaque Black 180, 1 kg
37510057180Deep Black 188, 1 kg
37510057188Light Yellow 922, 1 kg
37510057922Medium Yellow 924, 1 kg
37510057924Orange 926, 1 kg
37510057926Scarlet Red 932, 1 kg
37510057932Carmine Red 934, 1 kg
37510057934Magenta 936, 1 kg
37510057936Violet 950, 1 kg
37510057950Ultramarine Blue 952, 1 kg
37510057952Brilliant Blue 956, 1 kg
37510057956Blue Green 960, 1 kg
37510057960Grass Green 962, 1 kg
37510057962White 970, 1 kg
37510057970Black 980, 1 kg
37510057980Special Binder 904, 1 kg
37510057904Varnish "Inline Foiling Tubes" LEDC-IFT, 1 kg
37510057001Opaque White, silicone-free 171, 1 kg
37510057171
Properties:
UV-LED-curable screen printing Ink for pretreated polyethylene and polypropylene, polyester PET and PETG, rigid PVC, polycarbonate, and polystyreneVery fast curing, high gloss, very good water resistance, good structural viscosity, versatile
Substrates:
- Polyethylene (PE), pre-treated
- Polyproylen (PP), treated
- Polyester (PETG, PETA)
- PVC, rigid
- Polycarbonate (PC)
- Polystyrene (PS)
Auxiliaries:
| UVV1 | Thinner | 1 - 10 % |
| H3 | Hardener | 2 - 4 % |
| UV-B1 | UV Accelerator | 1 - 4 % |
| UV-B4 | UV Accelerator | 1 - 4 % |
| UV-B5 | UV Accelerator | 1 - 4 % |
| STM | Thickening Agent | 0.5 - 2 % |
| UV-VM | Levelling Agent | 0.5 - 1.5 % |
| UV-SA1 | Surface Additive | 0.4 - 0.8 % |
| UV-TA1 | Thickening Agent | 0.1 - 0.5 % |
| UR3 | Cleaner (flp. 42°C) | |
| UR4 | Cleaner (flp. 52°C) | |
| UR5 | Cleaner (flp. 72°C) |
Ink adjustment:
- Stir thoroughly to ensure homogeneous mixing
- When using as a 2-component ink, mix the hardener thoroughly
- Do not process below 15 °C
- Avoid exposure to high humidity after printing
- Let the mixture rest for 15 min before use
- Avoid direct daylight and intense machine lighting
- Pot life: 6-8 h at 20-25 °C and 45-60 % RH
- Absolute cleanliness required for stencils, squeegees, ink pumps, tubes and injectors
- Manual follow-up cleaning with silicone-free cleaner after automatic washing
- Watch out for adhesive tapes - some contain silicone-based release agents
- No mixing with silicone‑containing shades; no overprinting of silicone‑free on silicone‑containing shades
All Ultra Pack LEDC shades are brilliant and high-gloss at the best possible opacity. Further characteristics:
- fast curing
- very good 1-c water and steam resistance
- high filling resistance
- flexible ink film
- thixotropic structure, and no dripping through during machine stops
- can be over-embossed with hot stamping foil
Drying:
- LED-Härtung: Wellenlängenbereich 385 - 395 nm
- UV-Härtung: 180-240 W/cm, 20 m/min; 12 m/min bei hochdeckenden Tönen
- Nachhärtung innerhalb von 24 h
- Makulaturdrucke vollständig aushärten
Printing parameters:
Mesh: 120-31 to 180-31. Fabric tension > 16 N.
Stencils: Capillary films (15–20 µm) or emulsions and combination stencils.
- Polyethylene (PE), pre-treated
- Polyproylen (PP), treated
- Polyester (PETG, PETA)
- PVC, rigid
- Polycarbonate (PC)
- Polystyrene (PS)
- Packaging printing
- Flatbed label printing
- No thermal stress for the substrate
- No ventilation necessary
- No pre-heating necessary, for high outputs
- Flexible printing process without conventional post curing
- Highest energy efficiency
Substrates:
Industry solution for:
Highlights:
LED does not emit infrared radiation, and thus no heatOnly UV-A radiation, causing no ozone emissionsUV-LED lamps are immediately ready for useLong lifetime of the UV-LED lamps compared to conventional UV lampsUV-LED formulation allows conventional UV curing or LED curing without additional post curingLED curing at an intensity peak of 380 - 395 nmDepending upon the printing speed, UV-LED lamps with a power range > 4 W/cm2 can be used- High Opaque Shades122
High Opaque Light Yellow
132High Opaque Scarlet Red
152High Opaque Ultramarine Blue
162High Opaque Grass Green
170Opaque White
180Opaque Black
188Deep Black
Basic Shades922Light Yellow
924Medium Yellow
926Orange
932Scarlet Red
934Carmine Red
936Magenta
950Violet
952Ultramarine Blue
956Brilliant Blue
960Blue Green
962Grass Green
970White
980Black
Further Products904Special Binder
Special Products "Inline Foiling Tubes"LEDC-IFTVarnish "Inline Foiling Tubes"
171Opaque White, silicone-free
High Opaque Light Yellow 122, 1 kg
37510057122High Opaque Scarlet Red 132, 1 kg
37510057132High Opaque Ultramarine Blue 152, 1 kg
37510057152High Opaque Grass Green 162, 1 kg
37510057162Opaque White 170, 1 kg
37510057170Opaque Black 180, 1 kg
37510057180Deep Black 188, 1 kg
37510057188Light Yellow 922, 1 kg
37510057922Medium Yellow 924, 1 kg
37510057924Orange 926, 1 kg
37510057926Scarlet Red 932, 1 kg
37510057932Carmine Red 934, 1 kg
37510057934Magenta 936, 1 kg
37510057936Violet 950, 1 kg
37510057950Ultramarine Blue 952, 1 kg
37510057952Brilliant Blue 956, 1 kg
37510057956Blue Green 960, 1 kg
37510057960Grass Green 962, 1 kg
37510057962White 970, 1 kg
37510057970Black 980, 1 kg
37510057980Special Binder 904, 1 kg
37510057904Varnish "Inline Foiling Tubes" LEDC-IFT, 1 kg
37510057001Opaque White, silicone-free 171, 1 kg
37510057171
Available in these sizes / volumesHigh Opaque Shades122High Opaque Light Yellow
132High Opaque Scarlet Red
152High Opaque Ultramarine Blue
162High Opaque Grass Green
170Opaque White
180Opaque Black
188Deep Black
Basic Shades922Light Yellow
924Medium Yellow
926Orange
932Scarlet Red
934Carmine Red
936Magenta
950Violet
952Ultramarine Blue
956Brilliant Blue
960Blue Green
962Grass Green
970White
980Black
Further Products904Special Binder
Special Products "Inline Foiling Tubes"LEDC-IFTVarnish "Inline Foiling Tubes"
171Opaque White, silicone-free
High Opaque Light Yellow 122, 1 kg
37510057122High Opaque Scarlet Red 132, 1 kg
37510057132High Opaque Ultramarine Blue 152, 1 kg
37510057152High Opaque Grass Green 162, 1 kg
37510057162Opaque White 170, 1 kg
37510057170Opaque Black 180, 1 kg
37510057180Deep Black 188, 1 kg
37510057188Light Yellow 922, 1 kg
37510057922Medium Yellow 924, 1 kg
37510057924Orange 926, 1 kg
37510057926Scarlet Red 932, 1 kg
37510057932Carmine Red 934, 1 kg
37510057934Magenta 936, 1 kg
37510057936Violet 950, 1 kg
37510057950Ultramarine Blue 952, 1 kg
37510057952Brilliant Blue 956, 1 kg
37510057956Blue Green 960, 1 kg
37510057960Grass Green 962, 1 kg
37510057962White 970, 1 kg
37510057970Black 980, 1 kg
37510057980Special Binder 904, 1 kg
37510057904Varnish "Inline Foiling Tubes" LEDC-IFT, 1 kg
37510057001Opaque White, silicone-free 171, 1 kg
37510057171- Polyethylene (PE), pre-treated
- Polyproylen (PP), treated
- Polyester (PETG, PETA)
- PVC, rigid
- Polycarbonate (PC)
- Polystyrene (PS)
- Stir thoroughly to ensure homogeneous mixing
- When using as a 2-component ink, mix the hardener thoroughly
- Do not process below 15 °C
- Avoid exposure to high humidity after printing
- Let the mixture rest for 15 min before use
- Avoid direct daylight and intense machine lighting
- Pot life: 6-8 h at 20-25 °C and 45-60 % RH
- Absolute cleanliness required for stencils, squeegees, ink pumps, tubes and injectors
- Manual follow-up cleaning with silicone-free cleaner after automatic washing
- Watch out for adhesive tapes - some contain silicone-based release agents
- No mixing with silicone‑containing shades; no overprinting of silicone‑free on silicone‑containing shades
- fast curing
- very good 1-c water and steam resistance
- high filling resistance
- flexible ink film
- thixotropic structure, and no dripping through during machine stops
- can be over-embossed with hot stamping foil
- LED-Härtung: Wellenlängenbereich 385 - 395 nm
- UV-Härtung: 180-240 W/cm, 20 m/min; 12 m/min bei hochdeckenden Tönen
- Nachhärtung innerhalb von 24 h
- Makulaturdrucke vollständig aushärten
Properties:
UV-LED-curable screen printing Ink for pretreated polyethylene and polypropylene, polyester PET and PETG, rigid PVC, polycarbonate, and polystyrene
Very fast curing, high gloss, very good water resistance, good structural viscosity, versatileSubstrates:
Auxiliaries:
UVV1 Thinner 1 - 10 % H3 Hardener 2 - 4 % UV-B1 UV Accelerator 1 - 4 % UV-B4 UV Accelerator 1 - 4 % UV-B5 UV Accelerator 1 - 4 % STM Thickening Agent 0.5 - 2 % UV-VM Levelling Agent 0.5 - 1.5 % UV-SA1 Surface Additive 0.4 - 0.8 % UV-TA1 Thickening Agent 0.1 - 0.5 % UR3 Cleaner (flp. 42°C) UR4 Cleaner (flp. 52°C) UR5 Cleaner (flp. 72°C) Ink adjustment:
All Ultra Pack LEDC shades are brilliant and high-gloss at the best possible opacity. Further characteristics:Drying:
Printing parameters:
Mesh: 120-31 to 180-31. Fabric tension > 16 N.
Stencils: Capillary films (15–20 µm) or emulsions and combination stencils.
CONTACT US
Marabu printing inks are used all over the world - with 16 subsidiaries worldwide and distribution partners in more than 80 countries. Find your contact here.