Marabu Technical Sprays.
Transparent specialty solutions for flawless surfaces
Marabu Technical Sprays are transparent, solvent-based specialty sprays. They are used to either optimize substrate preparation or protect designed surfaces. Easy to apply.
- Colorless, solvent-based sprays
- Available for various applications
- For an invisible protective film on graphic and artistic works
- Or for transparent protection of almost all surfaces
Highlights:
- Transparent special sprays
- Solvent-based
- Available for various applications
- Easy to use
- Ideal for optimal substrate preparation or protecting designed surfaces
- Create an invisible protective film on graphic and artistic works
- Ideal for transparent protection of almost all surfaces
Available in these sizes / volumes
862
Fixative
857
Gloss varnish
850
Matt Varnish
858
Satin matt varnish
Fixative 862, 150 ml
23111006862
23111006862
Gloss varnish 857, 150 ml
23111006857
23111006857
Matt Varnish 850, 150 ml
23111006850
23111006850
Satin matt varnish 858, 150 ml
23111006858
23111006858
862
Fixative
857
Gloss varnish
850
Matt Varnish
858
Satin matt varnish
Fixative 862, 400 ml
23111018862
23111018862
Gloss varnish 857, 400 ml
23111018857
23111018857
Matt Varnish 850, 400 ml
23111018850
23111018850
Satin matt varnish 858, 400 ml
23111018858
23111018858
- 862
Fixative
857Gloss varnish
850Matt Varnish
858Satin matt varnish
Fixative 862, 150 ml
23111006862Gloss varnish 857, 150 ml
23111006857Matt Varnish 850, 150 ml
23111006850Satin matt varnish 858, 150 ml
23111006858 - 862
Fixative
857Gloss varnish
850Matt Varnish
858Satin matt varnish
Fixative 862, 400 ml
23111018862Gloss varnish 857, 400 ml
23111018857Matt Varnish 850, 400 ml
23111018850Satin matt varnish 858, 400 ml
23111018858
1. Spray only on surfaces that are dry, dust-free, and grease-free.
2. Thoroughly cover the work area and protect the surrounding environment from the spray mist. For best results, spray outdoors or ensure adequate ventilation.
3. Carefully remove the spray heads from the cans and take off the red safety valve. Replace the spray heads and caps, then shake the cans for two to three minutes.
4. Spray onto cardboard or newspaper first to check for any solids stuck in the spray head.
5. Allow the sprayed paint to dry. It will be dust dry after approximately 10 minutes, and completely dry after approximately 24 hours.
6. After use, turn the can upside down and spray until only gas comes out of the riser pipe to prevent clogging of the valve. Clean the nozzle with a cloth.
- Optimal adhesion on dry, dust-free, and grease-free surfaces.
- Wear discarded clothing or a painting smock.
- Spray outdoors, not in cold weather (observe information on temperature and spray distance on the label).
- Wash stains and work tools immediately with cleaning solvent (check material suitability beforehand).
to be created safety instructions
- Transparent special sprays
- Solvent-based
- Available for various applications
- Easy to use
- Ideal for optimal substrate preparation or protecting designed surfaces
- Create an invisible protective film on graphic and artistic works
- Ideal for transparent protection of almost all surfaces
Highlights:
- 862
Fixative
857Gloss varnish
850Matt Varnish
858Satin matt varnish
Fixative 862, 150 ml
23111006862Gloss varnish 857, 150 ml
23111006857Matt Varnish 850, 150 ml
23111006850Satin matt varnish 858, 150 ml
23111006858 - 862
Fixative
857Gloss varnish
850Matt Varnish
858Satin matt varnish
Fixative 862, 400 ml
23111018862Gloss varnish 857, 400 ml
23111018857Matt Varnish 850, 400 ml
23111018850Satin matt varnish 858, 400 ml
23111018858
Available in these sizes / volumes862Fixative
857Gloss varnish
850Matt Varnish
858Satin matt varnish
Fixative 862, 150 ml
23111006862Gloss varnish 857, 150 ml
23111006857Matt Varnish 850, 150 ml
23111006850Satin matt varnish 858, 150 ml
23111006858862Fixative
857Gloss varnish
850Matt Varnish
858Satin matt varnish
Fixative 862, 400 ml
23111018862Gloss varnish 857, 400 ml
23111018857Matt Varnish 850, 400 ml
23111018850Satin matt varnish 858, 400 ml
23111018858
1. Spray only on surfaces that are dry, dust-free, and grease-free.
2. Thoroughly cover the work area and protect the surrounding environment from the spray mist. For best results, spray outdoors or ensure adequate ventilation.
3. Carefully remove the spray heads from the cans and take off the red safety valve. Replace the spray heads and caps, then shake the cans for two to three minutes.
4. Spray onto cardboard or newspaper first to check for any solids stuck in the spray head.
5. Allow the sprayed paint to dry. It will be dust dry after approximately 10 minutes, and completely dry after approximately 24 hours.
6. After use, turn the can upside down and spray until only gas comes out of the riser pipe to prevent clogging of the valve. Clean the nozzle with a cloth.- Optimal adhesion on dry, dust-free, and grease-free surfaces.
- Wear discarded clothing or a painting smock.
- Spray outdoors, not in cold weather (observe information on temperature and spray distance on the label).
- Wash stains and work tools immediately with cleaning solvent (check material suitability beforehand).
-
to be created safety instructions
CONTACT US
Marabu connects the world through color and creativity - from Germany to North America, in over 50 countries, in stores and online. Find your contact here.